SUBMERSIBLE DEWATERING PUMPS

 
( SL - SERIES )  
   
Portable & self priming with bottom suction which enables the pump to dewater up to the lowest level.
Motor available in "F" class insulation also have option of submersible winding.
Motor - 2800 rpm suitable for 230 VAC single phase for pumps up to 2 HP and for entire range 415 vac,3ǿ ,50 Hz power supply.
Motor is jacketed hence cooling takes place faster.
Dual mechanical seal. for protection of motors, pump side seal Tc Vc Tc.
Cable - of suitable rating x 4 core submersible cable of 10 mtrs length free with the pump.
 
  MATERIAL OF CONSTRUCTION
Up to 10 HP - The entire pump and motor body made of aluminum alloy and outer stainless steel jacket, hence light weight and portable
15 to 30 pumps are in fabricated MS construction. Impeller - SS - 410.
SUBMERSIBLE DEWATERING PUMP
 
GNS SERIES PUMP CROSS SECTION DIAGRAM
   
PART NAME
1.
LIFTING HOOK
2.
TOP SHELL
3.
BOLT
4.
DRAIN NUT
5.
TOP END SHIELD
6.
DELIVERY FLANGE
7.
SHAFT
8.
MOTOR BODY
9.
WINDING WIRE
10.
STATOR
11.
ROTOR
12.
MIDDLE SHELL
13.
BEARING
14.
MECHANICAL SEAL
15.
BOTTOM END SHIELD
16.
'O' RINGS
17.
BOTTOM SHELL
18.
STRAINER
19.
BOTTOM PLATE
20.
NY-LOCK NUT
21.
IMPELLER
22.
CABLE GROMMET
23. CABLE GLAND 24. STUD
25. CABLE    
 
 
MODEL - SL - 120S/T, SL-115S/T
 
 
MODEL - SL - 25S/T,SL-318,SL-326,SL-526
 
 
MODEL - SL - 721,SL-1020,SL-736,SL-1040
 
 
MODEL - SL - 1530,SL-2035, SL-2540,SL-3045
 
 
In Veiw Of Continuous Development we Reserve Right to Change Design and / or Dimensions Without Notice